Jump directly to AlamoMotorsports.Com
for fast, easy, online ordering and great prices on:

ThermoTec Insulating Products


Thermo-Tec Logo



     For more than a decade Thermo-Tec has been developing solutions to the ever pressing destructive nature of automotive exhaust heat. Thermo-Tec offers a complete line of comprehensive exhaust insulating products.
     Exhaust Insulating Wrap was designed, developed, tested and patented in 1988 by Thermo-Tec. The exhaust wrap quickly became a fast seller. With over 2 million rolls sold, it is easy to see that exhaust heat was and still is a serious problem. Since then, Thermo-Tec has designed and developed over 40 part numbers related to exhaust heat.
     With Thermo-Tec's extensive testing program both on and off the race track, each product sold is considered the highest of quality. Thermo-Tec has supported the automotive racing, heavy-duty, industrial, marine and aircraft industry for more than a decade. Their belief in Thermo-Tec products has allowed Thermo-Tec to be the #1 source for exhaust heat solutions.


     Exhaust Jackets - The new High-Velocity Exhaust Jackets are a innovative way to insulate and block radiant heat. The jackets cover the tubes vertically allowing for a consistent fit. The fit allows the exhaust system to expand as it comes up to operating temperatures without restrictions and provides air space for added insulation. This unique application can be applied with the headers in the vehicle.
     Exhaust Insulating Wrap - Thermo-Tec Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. Wrapping headers with Header Wrap creates hotter exhaust gases that exit the system faster thru decreased density.Increased exhaust scavenging is produced, along with lower intake temperatures. Withstands continuous heat up to 2000°F, and contains no asbestos. The Header Wrap is sold in one or two inch wide 50' rolls with a low profile 1/16" thickness.
     Hi-Heat Coating - To finish off a clean and well protected Exhaust Insulating Wrap application, it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface and help extend the life of wrap by protecting it from friction, and seals the pores to minimize the penetration of harmful liquids. The 11oz. coating comes in black and aluminum colors.
     Snap Strap - The multi-purpose stainless steel Snap Straps are used to secure the Exhaust Insulating Wrap, and more. The high temperature stainless steel straps have a narrow profile to fit tight spots and they can be cut to the exact length needed. Secures with easy-to-use slide thru fasteners. Sold in 10', 20' and 25' lengths.
     Aluminized Heat Barrier - The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures in excess of 2000° F. In applications for retaining heat, such as manifolds and exhaust systems the fabric side of the material should be facing the heat source. This product can be installed using standard rivets with a backup washer or weather strip adhesive. Thermo-Tec’s Snap Straps can also be used to hold the blanket in place for manifolds or exhaust systems.
     Thermo-Shield - The NEW seamless Thermo-Shield protects hoses and wires from radiant heat. Thermo-Shield is used in applications where it is difficult or not practical to disconnect one end of the hose or wire. The adhesive tape can easily be wrapped around the hose or wire to make a clean professional appearance. Thermo-Shield is packaged in 1 1/2" X 15' rolls.
     Header Manifold Blanket - The Header Manifold Blanket provides excellent heat retention for exhaust headers and manifolds. This flexible heat sield simply clips into place on the upper portion of the header. The fabric side of the material should be facing the heat source. The aluminized side facing away, offering protection from abrasion and harmful liquid spills. The Header Manifold blanket is available in two sizes.
     Thermo-Sleeve - Lamination of a high temperature fabric to a highly reflective foil is the makeup of Thermo-Sleeve, which provides protection from radiant heat for hoses and wires. The aluminized sleeving reflects over 90 percent of radiant heat, and is fireproof and oil resistant. Thermo-Sleeve is packaged in 3 or 12 foot lengths, and is sold in five different diameter sizes. It is available in custom lengths for special applications.
     Cool-It Mat - Use the COOL-IT MAT to battle excessive heat and noise that penetrate the driver compartment thru the firewalls and floorboards. It is also perfect for in doors, under hoods, and above transmission housings. The COOL-IT MAT is composed of resin-bonded silica blanketing insulation sandwiched between a mylar facing on one side and a foil facing on the other. It is easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive.
     Starter Heat Shield - In today’s high heat environment, starters take in a lot of damaging heat that destroy the windings of the starter and solenoid. To combat this problem Thermo-Tec created a nonconductive strap on heat shield, with a highly reflective mylar surface. The Starter Heat Shield will reflect over 90% of radiant heat, adding life to the starter and assuring reliable starts. The Starter Heat Shield is a universal kit that fits all starters.
     Spark Plug Wire Heat Shield - The heat shield that offers the ultimate protection for spark plug wires and boots from conductive and radiant heat. The dual purpose sleeve has a surface that reflects over 90% of radiant heat while the inside silica based fabric prevents conductive heat from penetrating.
     Turbo Kit - The Turbo Kit was designed to protect, improve performance and eliminate turbo lag of a turbo charger. This complete kit to contain the heat produced by a turbo fits a wide variety of turbines. The cut to fit kit comes with an excessive amount of material to cover turbos from the smallest automotive application to heavy-duty truck applications. Two Turbo Kits are available, a four cyl. kit and a six and eight cyl. kit.

Pricing:

(Click on the product description to see an image!)

Exhaust Insulating Wrap:      
1" X 1/16" X 50' 11001 $29.09 $24.73
2" X 1/16" X 50' 11002 $48.47 $41.20
2" X 1/16" X 100' 11003 $96.95 $82.41
6" X 1/16" (per foot, specify length) 11006 $2.28 $1.94
Graphite Black Wrap:      
1" X 1/16" X 50' 11021 $32.30 $27.45
2" X 1/16" X 50' 11022 $51.68 $43.93
2" X 1/16" X 100' 11023 $100.12 $85.11
Exhaust Insulating Wrap (Short):      
1" X 1/16" X 15' 11151 $8.72 $7.41
2" X 1/16" X 15' 11152 $14.53 $12.35
Exhaust Jackets:      
4/6 cylinder kit 11246 $78.48 $66.71
8 cylinder set 11248 $102.57 $87.18
Hi-Heat Coating 11 oz can:      
Black 12001 $8.72 $7.41
Aluminum 12002 $8.72 $7.41
Snap Strap:      
20' Strap & 20 clips 13001 $17.48 $14.86
25' Strap & 25 clips 13002 $21.86 $18.58
Aluminized Heat Barrier 10 square feet 14001 $86.13 $73.21
Thermo-Shield 1-1/2" X 15' roll 14002 $16.45 $13.98
Header Manifold Blanket:      
2 (20" X 24") blankets (V6-V8 Big Block) 14003 $92.31 $78.46
1 (36" x 40") blanket (Inline 4-6) 14004 $86.78 $73.76
Thermo-Sleeve:      
3' roll, size 1/4" to 1/2" 14005 $12.27 $10.43
12' roll, size 1/4" to 1/2" 14006 $49.09 $41.73
3' roll, size 5/8" to 1" 14010 $16.33 $13.88
12' roll, size 5/8" to 1" 14011 $65.32 $55.52
3' roIl, size 1-1/8" to 1-1/2" 14015 $20.51 $17.43
12' roIl, size 1-1/8" to 1-1/2" 14016 $82.04 $69.73
3' roll, size 1-5/8" to 2" 14020 $24.57 $20.88
12' roll, size 1-5/8" to 2" 14021 $98.27 $83.53
3' roll, size 2-1/8" to 2-1/2" 14025 $28.62 $24.33
12' roll, size 2-1/8" to 2-1/2" 14026 $114.48 $97.30
Cool-It Mat:      
24" X 48" 14100 $32.04 $27.23
48" x 48" 14110 $64.07 $54.46
Starter Heat Shield 7" X 22" 14150 $28.20 $23.97
Spark Plug Wire Heat Shield:      
Two (6" X 2-1/2") 14200 $17.82 $15.15
Four (6" X 2-1/2") 14250 $35.65 $30.30
Thermo-Flex Heat Shield:      
Two (6" x 1" ID) 14300 $18.17 $15.44
Four (6" x 1" ID) 14350 $36.34 $30.88
Turbo Kit (Complete Kit and Hardware):      
4 Cylinder 15001 $103.74 $88.18
6 & 8 Cylinder 15002 $121.18 $103.00
Muffler/Cat Shield 24" X 40" 16500 $64.29 $54.65
Ultra-Lite Comp. Floor Insulating Mat:      
8" X 12" 16510 $62.98 $53.53
10" X 18" 16520 $90.43 $76.87
18" X 18" 16530 $109.79 $93.32
18" X 24" 16540 $116.25 $98.81
24" X 24" 16550 $124.35 $105.70
24" X 36" 16560 $132.42 $112.56
Thermo-Flex Aluminum;      
5/8" x 36" 17062 $13.36 $11.36
3/4" x 36" 17075 $14.98 $12.73
1" x 36" 17100 $17.30 $14.70
1 1/4" x 36" 17125 $19.48 $16.56
1 1/2" x 36" 17150 $22.08 $18.77
3" x 36" 17300 $35.89 $30.51
5/8" x 10' 17062-10 $44.57 $37.89
3/4" x 10' 17075-10 $49.90 $42.42
1" x 10' 17100-10 $57.65 $49.00
1 1/4" x 10' 17125-10 $64.92 $55.18
1 1/2" x 10' 17150-10 $73.64 $62.59
3" x 10' 17300-10 $119.66 $101.71

     We will attempt to beat or match any verifiable price, including specials. Give us the opportunity to win your business. Try us for the prices--you'll stay for the service!
     Email cap@cyberauto.com or visit Thermo-Tec's website to get additional information!